Length & Angle Sensors

One unit measures boom length and luffing angle together — one mounting point, one cable, one CANopen node.

What is a length-angle sensor?

A draw-wire length sensor with an integrated angle measurement. The wire rope tracks boom extension; the angle unit tracks the boom’s luffing angle at the same time.

  • Angle range: 0–360° (−180° to +180°), accuracy ±0.2°, resolution 0.1°.
  • Output: length and angle over CANopen — length on PDO1, angle on PDO2 (LG series).
  • Feeds the machine’s controller or rated capacity limiter with both values from a single sensor.

Why one unit instead of two?

  • Less hardware: one mounting point, one cable run, one CANopen node address.
  • Synchronized data: length and angle come from the same unit, at the same cycle.
  • Faster install: fewer brackets, fewer connectors, less wiring on the boom.

The range at a glance

LGH12M length and angle sensor

LGH Series — 0 to 12 m

Compact length-angle sensor for crane and AWP booms. Length-only and length+angle versions available.

Angle ±0.2° · CANopen · IP67 electronics chamber · −40 to +85 °C

LG / LGH series details
LAS15M long-range draw-wire sensor

LAS Angle Versions — 0 to 35 m

Long-range length-angle measurement in a carbon steel housing, for large machines and long booms.

Angle ±0.2° · CANopen / 4–20 mA / 0.5–4.5 V · IP67 electronics chamber

Compare models

ModelLength rangeAngle rangeAngle accuracyInterfaceProtectionCable life
LGH08M3 / 5 / 8 m0–360° / −180° to +180°±0.2°CANopenIP67 (electronics chamber)≥150,000
LGH12M10 / 12 m0–360° / −180° to +180°±0.2°CANopenIP67 (electronics chamber)≥100,000
LAS15M15 m0–360° / −180° to +180°±0.2°CANopen / 4–20 mA / 0.5–4.5 VIP67 (electronics chamber)≥100,000
LAS25M25 m0–360° / −180° to +180°±0.2°CANopen / 4–20 mA / 0.5–4.5 VIP67 (electronics chamber)≥100,000
LAS35M35 m0–360° / −180° to +180°±0.2°CANopen / 4–20 mA / 0.5–4.5 VIP67 (electronics chamber)≥50,000

Length accuracy: ±0.25% FS (ranges < 8 m), ±0.5% FS (ranges ≥ 8 m). Angle resolution 0.1°. Operating temperature −40 to +85 °C (all models).

Frequently asked questions

How accurate is the angle measurement?

±0.2° accuracy, 0.1° resolution, over a 0–360° (−180° to +180°) range — on both LGH and LAS angle versions.

How do length and angle reach the controller?

Over CANopen. On the LG series, length is PDO1 and angle is PDO2; node ID, bit rate and cycle time are configurable via SDO.

Do I still need a separate tilt sensor?

For boom luffing angle, no — the length-angle unit covers it. For chassis or platform leveling you still want a dedicated tilt sensor.

Is a redundant version available?

Yes. The LG series offers a redundant dual-channel version (M12 8-pin) for safety-related applications.

Length-only or length+angle — how do I order?

Both versions share the same housing and interface. Tell us the range and whether you need the angle output, and we will confirm the exact model code.

Downloads

  • ZHONGZE Product Catalog (English)PDF, 24 pages — full sensor rangeDownload PDF

Tell us your application.

Send us your measuring range, interface and machine type — we will come back with a matching sensor and a quotation.

Send Inquiry